Florida Epoxy Primer Deluxe from Sico Paints Factory, durable, high-performance primer based on cured polyamide resins and suitable for priming and preparing surfaces prior to final coating, provides good protection against scratches and corrosion, with high resistance to water and a wide range of chemicals, suitable to use as a protective coat for storage areas and as a priming coat for surfaces before applying subsequent coats for exterior and interior surfaces of metal, concrete, available in a wide range of colors to meet the needs of all designs.

• Color: Clear and also available in White, Gray, or as required
• Finish: Matt Smooth
• Packing: 20Kg Drum (17Kg Epoxy + 3Kg Hardener)
• Density: 1.58 – 1.66  gm/cm3
• Solid contents: 55 – 65 %
• Coverage: 8 – 10 m2/Lit  (at 50 micron DFT) 
• Flash Point: At 20°C
• Mixing ratio: 5 : 1 (Epoxy : Hardener) By Volume 
• Dilution: Epoxy Diluent
• Coat Thickness: 50 Microns DFT Minimum Depends on surface type and application method
• Draying Time (At 25°C): Touch dry Approximately 4 hours, Full Cure Approximately 12 hours, Recoat interval Approximately 8 hours
• Application Tools: Air & airless Spray Gun, Brush, or Roller