Home
Plumbing
Pipes and plumbing connections
PVC Pipes and Fittings
TEE PVC

TEE PVC

Access Tee PVC is an easy solution for directing liquid or gas flow The PVC Tee is a pipe fitting used to direct the flow of liquids or gases around 45° and 90° angles. Available in a variety of sizes and shapes, it’s suited for a wide range of applications.

Youmats offers a selection of PVC plastic access, including PVC-U tee 90° and PVC-U tee 45°, making it useful in various plumbing applications like sewage systems and residential projects. Uses of PVC Tee socket - Plumbing and Sewage Systems: PVC dividers are widely used in residential and commercial systems to connect and distribute water or sewage in multiple directions. - Irrigation Systems: They facilitate easy water flow toward multiple paths in irrigation systems, making water distribution more efficient. - Industrial Applications: Ideal for systems transporting liquids or gases in environments prone to corrosion, as PVC resists many chemicals. Youmats also provides the PVC Y tee, a type of pipe connector designed in a Y-shape, used to split or direct flow at an angled path, often 45°. The Y-access design allows for a smooth flow without sharp directional changes, reducing pressure and improving the flow of liquids or gases within the system.

For safe use, PVC Tee Fitting should be properly matched to the pipe to prevent leaks, and the appropriate size should be chosen to ensure maximum efficiency.

Brand

APLACO

Chanal

NIBCO

3P Pipes

Alrajhi

Al-Jawdah (JTP)

Sappco

United Gulf

Almanar

Product List

TEE 90 EDG

TEE 90 EDG WITH BRASS INSERT (SLIP X FPT)

TEE REDUCING

TEE 45 EDG

ACCESS TEE 90 EDG

TEE 90° (S x S x FPT)

Tee

Gully Trap

SikaDur 32 Hi-Mod

Schedule

Size

½ inch

¾ inch

1 inch

1 ¼ inch

1 ½ inch

2 inch

2 ½ inch

3 inch

4 inch

6 inch

8 inch

½x½ inch

¾x½ inch

¾×¾×½ inch

1×1×½ inch

1×1×¾ inch

1 ¼×1 ¼×½ inch

1 ¼×1 ¼×¾ inch

1 ¼×1 ¼×1 inch

1 ½×1 ½×½ inch

1 ½×1 ½×¾ inch

1 ½×1 ½×1 inch

1 ½×1 ½×1 ¼ inch

2×2×1 inch

2×2×1 ¼ inch

2×2×1 ½ inch

6×6×4 inch

2×2×¾ inch

1 × ½ inch

1 × ¾ inch

¾ × ¾ inch

1 × 1 inch

100 mm

110 mm

160 mm

4 × 2 inch

4 × 3 inch

¼ inch

10 inch

12 inch

2×2×½ inch

3×3×2 inch

4×4×2 inch

4×4×3 inch

90 mm

½ × ½ × ½ inch.

¾ × ¾× ¾ inch.

6×8 inch

4×8 inch

4×6 inch

2×6 inch

50 mm

75 mm

75×50 mm

110×50 mm

110×75 mm

160×110 mm

200 mm

Colour

White

Gray

Light Gray

Dark Gray

Orange

❓ Frequently Asked Questions

Match the tee size to the main drain line and branch size on your plumbing plan. For a typical Saudi home, a 4-inch PVC tee usually connects to a 4-inch soil or waste pipe and needs proper slope. Check local standards and confirm compatibility with existing pipes to avoid leaks.

Yes, a 4-inch PVC tee is suitable for non-pressurized drainage, waste, and vent applications in Saudi projects. It handles high heat and humidity when installed correctly. Do not use it for pressurized water lines, and ensure the tee meets project specifications to prevent leaks in exposed or buried locations.

A standard PVC tee joins a branch line to a main drain. A gully trap collects floor waste and blocks odors, while a Y tee provides a smoother angled connection for better flow. Choose the fitting based on the drainage type; Youmats lists these options clearly for sanitary and floor drain systems.

Clean the socket and pipe of dust, moisture, and debris before fitting. Apply the correct PVC cement to both surfaces, insert the tee with a slight twist, and hold it until set. Let the joint cure fully without water or pressure, especially in residential drain lines.

Youmats offers trade and project pricing for 4-inch PVC tees based on quantity, specification, and delivery location in Saudi Arabia. To receive a final tax-inclusive price, confirm the required quantity, project standards, and site location, since availability may vary by regional warehouse.