Florida Epoxy Deluxe Protective Paint, Glossy Clear, 20 Kg Drum | Sico Paints

Florida Epoxy Coating Deluxe from Sico Paints Factory, it is based on polyamide curing resins consisting of two components epoxy resin and hardener, which enhances performance and adhesion properties, excellent resistance to water, corrosion and wide range of chemicals, it also offers a high coverage and spreading rate, along with strong adhesion and high durability after drying, suitable to use as a protecting and decorating coat for all interior surfaces and can be applied on concrete, wooden, primed steel surface, floor in factories &warehouse, workshop, kitchen, available in a variety of colors to suit all designs.

• Color: Clear and also available in White, Gray, or as required
• Finish: Gloss
• Packing: 20Kg Set (17Kg Epoxy + 3Kg Hardener) Steel Drums
• Density: 1.47 – 1.55 gm/cm3
• Solid contents: 50 – 57 %
• Coverage:  5.5 – 7 m2/Lit  (at 50 micron DFT)
• Flash Point: At 20°C
• Mixing ratio: 5 : 1 (Epoxy : Hardener) By Volume 
• Dilution: Epoxy Diluent
• Coat Thickness: 50 Microns DFT Minimum (Depends on surface type and application method) 
• Draying Time (At 25°C): Touch dry Approximately 4 hours, Full Cure Approximately 24 hours, Recoat interval Approximately 8 hours
• Application Tools: Air & airless Spray Gun, Brush, or Roller