Home
/
Paints
/
Protective Coatings
/
Awazel Damp Coat Bituminous Paint, 18 kg drum

Awazel Damp Coat Bituminous Paint, 18 kg drum

(866 Product Views)

Awazel damp coat bituminous paint, 18 kg drum, formulated with high-quality asphalt and petroleum solvent, it is resistant to salts, acids, and alkalis

--}}

in stock

Call Now Chat Now

💳 general.accepted_payments

🔗 Related Content

Easycoat Plus Matt, Light Colors(Ba... Saudi Conduit Coating And Contracti... Protective Paint Strongcoat 400... Epoxy Coated Steel Reinforcing Mesh... PVC Coated Flexible Conduit, Size 4... Awazel Damp Coat Bituminous Paint, ... Awazel Damp Coat Bituminous Paint, ... Awazel Liquid Asphalt bituminous pa...

Product description

Awazel Damp Coat is a cold-applied bituminous damp-proof coating, formulated with high-quality asphalt and petroleum solvent, it is resistant to salts, acids, and alkalis, easy to apply, and requires no thinning or heating, suitable for application on existing surfaces as a rejuvenating layer and can also be used for damp-proofing behind marble and natural stone, as well as underground concrete foundations, basements, and metal surfaces.

Packaging: 18 kg
Brookfield Viscosity at 50°C: 300-700 CPs
Drying Time to Touch: 4-5 hours
Drying Time to Through: 30-48 hours
Density at 25°C: 0.91-0.96 g/cm³
Softening Point: 70-80°C
Penetration at 25°C: 25-35 (0.1 mm)
Ductility at 25°C: 15 cm (min)

Additional Information▼

Awazel Damp Coat (18 kg) — What it is used for

Awazel Damp Coat is an Awazel bituminous damp-proof coating supplied in an 18 kg drum. It is designed for cold application (no heating and no thinning required) and is commonly used on construction sites in Saudi Arabia to help reduce moisture penetration on suitable substrates such as underground concrete foundations, basements, and metal surfaces. It can also be used as a rejuvenating coat on existing surfaces where a bituminous damp-proof layer is required.

Technical details (Awazel Damp Coat)

Product	Awazel Damp Coat
Packaging	18 kg drum
SKU	YT-89694116
Formulation	High-quality asphalt with petroleum solvent
Chemical resistance	Resistant to salts, acids, and alkalis
Application	Cold-applied; easy to use; no thinning/heating required
Typical drying time (touch dry)	4–5 hours
Typical drying time (through dry)	30–48 hours

How to apply Awazel Damp Coat (site-ready steps)

Surface prep: Ensure the surface is clean, dry, and free from dust, loose particles, and oil/grease.
Mixing: Stir the material in the drum before use to achieve a consistent coating.
Application: Apply evenly as a damp-proof coat on suitable substrates. Plan work so the coat can dry without water exposure.
Drying: Allow adequate drying time between coats and before backfilling or covering (touch dry typically 4–5 hours; full drying 30–48 hours).
Coverage planning: Quantities depend on substrate condition and application thickness—confirm required drums based on your project area before checkout.

Tip for Saudi projects: Schedule application to avoid high dust periods and allow sufficient curing time on-site before protection layers or subsequent trades proceed.

Buying Awazel on Youmats (Saudi Arabia)

Correct pack size: This listing is for an 18 kg drum—ideal for contractors and maintenance teams managing damp-proofing works.
Product identification: Use SKU YT-89694116 when requesting quotations or matching site submittals.
Delivery readiness: Confirm site access and storage area to receive bituminous materials and keep drums sealed until use.