Fosroc Nitoflor FC150 Epoxy Floor Coating, 4.5 Litre Pack | Fosam
(3360 Product Views)
Fosroc nitoflor FC150 epoxy floor coating, 4.5 litre pack, produced by Fosam, provides a high quality floor finish that is resistant to chemicals and abrasion and is highly durable.
Product description
Fosroc Nitoflor FC150 from Fosam Company Limited, is a high-build, solvent-free epoxy floor coating that provides a wear-resistant, chemical-resistant, and abrasion-resistant finish. It is durable and reduces maintenance costs, with proven effectiveness against a wide range of industrial chemicals. It is slip-resistant and available in a wide range of colors to enhance the working environment and identify slip hazard areas. Ideal for use in wet areas requiring high resistance to chemicals, oils, and grease.
- Packaging: 4.5-Litre Pack
- Pot Life: 40 minutes / 20 minutes
- Cure Time: 24 hours / 18 hours
- Maximum Time Between Coats: 36 hours / 15 hours
- Light Traffic Use After: 24 hours / 18 hours
- Full Traffic Use After: 48 hours / 24 hours
- Dry Slip Resistance at 23°C: Extremely low (UK SRG classification)
- Compressive Strength: 70 N/mm²
- Flexural Strength: 40 N/mm²
- Tensile Strength (ASTM D638-99): 20 N/mm²
- Water Absorption (ASTM D570-98): <0.1%
- Shore D Hardness (ASTM D2240:1996): 77 – 85
- Standard Coverage: Base Coat (5.0 m²/L at 200 microns WFT), Top Coat (5.0 m²/L at 200 microns WFT)
- Flash Points: Nitoprime SP (57°C), Fosroc Solvent 102 (33°C)
- Shelf Life: 12 months when stored in warehouse conditions below 35°C in original, unopened packs
