Arki Top E60 High-build epoxy floor coating, 4 liter pack

Arki top E60 manufactured by Arki Company, is a two-pack solvent-free epoxy resin-based floor coating of medium viscosity, high compressive strength, excellent abrasion resistance, can be made non-slip for wet areas, used in chemical and pharmaceutical plants, power plants, turbine areas, offices and corridors.

• Type: Epoxy-based solvent- containing floor coating
• Packaging: 4 Liter pack
• Mixing ratio: Factory proportioned
• Solid content: 60% (volume)
• Specific Gravity: ~ 1.3
• Recommended wet film thickness (WFT): 125 microns per coat
• Dry film thickness (DFT):150 microns per 2 coats (recommended)
• Pot life (ASTM C2471): 45 minutes at 23°C, 20 minutes at 35°C
• Dry to touch time: 8-10 hours at 23°C, 4-6 hours at 35°
• Recoat time: 12-24 hours at 23°C, 8-16 hours at 35°C
• Cure time (Light traffic): 24 hours at 23°C, 18 hours at 35°C
• Full cure: 7 days at 23°C, 5 days at 35°C
• Chemical resistance: Lactic acid 10%, Hydrochloric acid 10%, Sulphuric acid 10%, Citric acid 10%, Sodium hydroxide 10%, Petrol, Distilled water, Kerosene, Detergents.
• Coverage: 5 m²/liter at 200 microns WFT
• Abrasion resistance (ASTM D4060): CS17 wheel, 1000 cycles, 90 mg lost.
• Bond strength (ASTM D4541): >3 MPa - concrete failure.
• Pencil hardness (ASTM D3363): 2H
• Storage and shelf life: 12 months when stored in a dry place and good warehouse conditions.