Flooring wire mesh

For standard residential floor slabs in Mecca or Riyadh, 8 mm wire mesh is usually preferred because it balances strength, cost, and ease of placement. Use 6 mm for light areas and 10 mm where repeated loads or high temperatures apply. Always confirm the size with the project engineer or structural specification before ordering.

The price per meter depends on wire diameter, mesh thickness, steel grade, mesh dimensions, and delivery location. An 8 mm floor mesh will cost differently from 6 mm or 10 mm. For an accurate quote in cities such as Dammam, Abha, or Jeddah, share the floor area and project specifications with Youmats.

6 mm wire mesh suits light slabs and low-load areas, while 8 mm offers higher strength for general floor concrete. A finishing slab usually needs a medium size with good stability against distortion. Check the mesh knot density, wire consistency, and support spacing before buying, especially for warehouses or industrial floors.

Yes, steel floor mesh made from treated wire performs well under Saudi conditions, including summer heat in Qassim and Medina and humidity in coastal areas. To reduce rust, choose mesh with a suitable protective coating, keep the surface clean before placement, and ensure proper support so it stays above the wet concrete.

Place the mesh on proper chairs or supports so it does not sink into the concrete, then maintain the required cover between the mesh and the slab surface. Fix the edges securely and overlap sections where needed. For heavy-duty floors in factories or storage areas, tie the mesh together and secure the perimeter to prevent movement and cracking.