Pin Insulator Spindle Hot Dip Galvanized Steel, Length 410 mm

Pin Insulator Spindle Hot Dip Galvanized Steel, Length 410 mm

(149 Product Views)

Insulator pin spindle, total length 410 mm, made of hot-dip galvanized steel to withstand corrosion and rust caused by exposure to weather conditions. It is used to support and secure pin-type insulators on power transmission and distribution towers and structures.

in stock

Call Supplier

About Product

Product description

Insulator pin spindle, made of hot-dip galvanized steel to withstand corrosion and rust caused by exposure to weather conditions. It is used to support and secure pin-type insulators on power transmission and distribution towers and structures. The spindle prevents the flow of electrical current from the conductor to the tower body, ensuring network safety and preventing accidents. The threaded top part is designed to hold the pin-type insulator, while the lower part is designed for mounting onto the tower or structure.

Bolt and body material: F-24 STEEL IRAM IAS U 500-503
Overall length: 410 mm
Length from top of lead sleeve to body base: 235 mm
Bottom part (thread) length: 80 mm
Thread diameter: M16 w/o IRAM 5134
Diameters of different parts: ⌀25 mm, ⌀30 mm, ⌀52 mm
Lead sleeve dimensions: Nominal diameter 25.4 mm, Fillet thickness 2.4 mm
Lead sleeve thread: Conical - round profile, taper 1:16, 4 fillets per inch (p = 6.35 mm)
Lead sleeve material: ALEACION PLOMO-ANTIMONY (MIN. 2.5% MAX. 5%)
Retaining plate material: F-20 STEEL IRAM IAS U 500-503
Retaining plate dimensions: 30x36 mm with ⌀18 mm hole and 16 mm thickness
Square nut material: F-24 STEEL IRAM IAS U 500-503 (IRAM 5140)
Surface protection: hot-dip zinc plating according to IRAM 20022 (ANNEX D)
Minimum allowable load value: 250 daN
Other requirements and tests according to: IRAM 2407