3×35+16mm2 Stranded Copper SWA Armored Cable, 600/1000V, PVC Insulated | Riyadh Cables
(1152 Product Views)
3.5 core armored power cable (CU/PVC/SWA/PVC) stranded copper conductor, The jacket also provides protection for the cable from abrasion, external factors, heat and moisture damage, Size 3×35+16 mm2, produced by Riyadh Cables Company.
Product description
3.5 core armored power cable (CU/PVC/SWA/PVC) stranded copper conductor, Produced by Riyadh Cables Company. according to IEC 60502-1 (International Electrotechnical Commission) standard. Armored with layer of steel wires (SWA) to give it mechanical strength to protect it from external pressures that fall on the cable. Also Insulated with two layers of high-quality PVC (polyvinyl chloride) material, the first layer provides excellent electrical insulation. The sheath also provides protection for the cable from corrosion, external factors, heat and moisture damage. It is used to conduct electrical current in various domestic, commercial and industrial applications. Such as lighting equipment, central air conditioners, power plugs, and home appliances. Available in a variety of sizes and colors with highest quality and best prices.
- Insulation Material: PVC (Polyvinyl Chloride)
- Outer jacket : PVC
- Voltage : 600/1000 volts
- Phase Conductor Shape: Sectoral Stranded (sm)
- Neutral Conductor Shape: Round Stranded (rm)
- Number of Cores: 3 Core + Neutral Line
- Conductor Size (Cross-Sectional Area): ( 3cx35 mm2 ) + 16mm2
- Number of Phase Wires: 6
- Number of Neutral Wires: 7
- Approx Diameter of Neutral Conductor: 5.03 mm
- Nominal Insulation Thickness of Phase: 1.2 mm
- Nominal Insulation Thickness of Neutral: 1 mm
- Armoring: SWA (Steel Wire Armor)
- Nominal Steel Wire Diameter: 1.6 mm
- Nominal Sheath Thickness: 1.9 mm
- Approx Overall Diameter: 30 mm
- Weight: 2375 kg/km
- Length : 1000 meters
- Phase Core Colors: (Red, Yellow, Blue, Black)
- Standard: IEC 60502-1
Additional Information▼
Why Choose SWA Armored Cables for This Type?
SWA Armored Cables (Steel Wire Armored) are used when there is a high need to withstand shocks and mechanical pressure during installation or in areas exposed to abrasion. In this product, the armor comes as an additional protective layer over the insulation and PVC sheath, helping to reduce the likelihood of cable damage due to the usual field conditions in construction projects within Saudi Arabia.
Quick Specifications (According to Product Data)
- Manufacturer: Riyadh Cables
- Cable Rating: Low Voltage Cables
- Voltage: 600/1000 Volts
- Number of Conductors: 3 Conductors + Neutral
- Size: 35 mm² (3×35 + 16 mm²)
- Insulation/Sheath: PVC Insulation / PVC Sheath
- Conductor Shape: Stranded Triangular
- Insulation Color: Red, Yellow, Blue, Black
- Length: 1000 meters
Quick Selection Guide Before Purchase
- Ensure the Size: Choose the appropriate cross-section for the required loads. This product has a cross-section of 3×35 + 16 mm² for three phases with neutral.
- Check the Installation Environment: If the route is exposed to abrasion or pressure, selecting SWA Armored Cables is practical for enhancing mechanical protection.
- Voltage Compatibility: Suitable for low voltage applications of 600/1000 Volts.
- Documentation of Specifications: Keep product data (manufacturer, size, voltage) for use within project requirements and procurement.
Installation and Usage Guidelines (General Information)
- It is preferable to carry out connection and termination work by a qualified electrician, in accordance with safety requirements at project sites within Saudi Arabia.
- Avoid bending the cable sharply or pulling it violently during installation to reduce stress on the outer layers.
- Before operation, check the integrity of the outer sheath and ensure there are no scratches or cuts that may affect protection.
Frequently Asked Questions About SWA Armored Cables (Summary)
If you are looking for SWA Armored Cables for your projects, the most important factors are matching the voltage, size, and number of conductors with load requirements, in addition to selecting armor when higher mechanical protection is needed during installation.
