Cable Tray Systems

Cable ladder straight, with an outside flange (ORF), height 150 mm, width 450 mm, 2mm thick, manufactured f...

Horizontal cable trunk elbow 90 deg with a butterfly (BF), manufactured from HDG steel. 2.0mm thick, 100mm...

Cable trunking straight reducer, with an insert nut (IN), 2.0mm thick, 60mm height, 750mm width. manufactur...

Perforated 45 degree internal riser bend cable tray, manufactured from powder-coated steel, 100mm height, 4...

Weatherproof (W/P) cable trunk internal riser, with an inside bend, manufactured from pre galvanized steel...

Aluminum straight cable ladder tray (OF), 137 mm height, 900mm width, channels size 41x21mm, flange width 2...

Weatherproof (W/P) cable trunk straight reducer, with an inside bend, manufactured from powder-coated steel...

Cable ladder straight, with an outside flange (ORF), manufactured from pre galvanized steel (GI), is charac...

Aluminum straight cable ladder tray, with an outside flange (OF), 110mm height, 300mm width, 2mm thick, C -...

Weatherproof (W/P) cable trunk tee, with an outside bend, manufactured from powder-coated steel. 1.5mm thic...

Vertical 90 degree inside riser perforated type cable tray, inside flange, 2.0mm thick, 60mm height, 900mm...

Aluminum cable trunk cross (W/P), outside bend, 2.0mm thick, 75mm height, 600mm width. Used to create 90-de...

Cable ladder tray elbow, with an inside flange (IF), 110mm side, 900mm width, 2mm thick, C - channels size...

Aluminum straight cable ladder with external flange, 137mm height, 600mm width, 2mm thickness, and 21mm fla...

Cable trunk cross with a butterfly (BF), produced by BAHRA company. manufactured from HDG steel. 2.0mm thic...

Aluminum cable trunk (solid bottom), 2.0mm thick, 75mm height, 750mm width. Installed with self-screws (SC)...

Horizontal cable trunk elbow 90 degree with a self screw (SC), manufactured from pre galvanized steel (GI),...

Cable ladder straight, with an outside flange (ORF), manufactured from pre galvanized steel (GI), manufactu...

Cable trunk cross with a butterfly (BF), produced by BAHRA company. manufactured from HDG steel. 2.0mm thic...

Aluminum cable ladder elbow (IF), 90° angle, 110mm side height, 600mm wide, 2mm thick, 41×21mm channels, 21...