Home
/
Building Material
/
Ready Mix Mortar
/
Arki-Plaster C Colored Cementitious Mortar, 20Kg Bag

Arki-Plaster C Colored Cementitious Mortar, 20Kg Bag

Name: Arki-Plaster C Colored Cementitious Mortar, 20Kg Bag
Brand: Arki
Rating: 4.5 (7 reviews)

(1973 Product Views)

Arky plaster c colored cement mortar, 20kg bag, it is easy to use and apply, and comes completely dry, it can be mixed with water only to be ready for use.

in stock

Quantity

Call Now

🔗 Related Content

Epoxy Floor Paint EPO Mortar NB San... Mesh Max Cementitious Putty for Ins... Arki-Plaster C Colored Cementitiou... Arki Putty Cement Wall Putty, Grey... Arki-Putty Cementitious wall putty,... Cementitious Colored Tile Grouts A... Cementitious Colored Tile Grouts A...

Product description

Arki Plaster C from Arki Company, is a dry polymer-treated cement mortar that is mixed with water only until it is ready for use, easy to apply and durable, formulated to be used as a thick colored plaster up to 10 mm over rigid cementitious substrates such as normal plaster, suitable for tropical and hot climate conditions.

Type: Pre-mixed cementitious powder
Packaging: 20 kg bags
Mix ratio: 4 liters of cold clean water per 20 kg bag
Bulk density: ~1.45 kg/l
Wet density: 1.75 kg/l
Pot life:45 minutes
Coverage: 1.4 m² / 20 kg bag at 10 mm thickness
Set time: 24 hours
Compressive Strength (EN1015-11:99): ≥ 2.5 MPa (after 28 days)
Flexural strength (EN 1015-11:99): ≥ 1.0 MPa (after 28 days)
Storage and shelf life: 12 months, Storage should be away from direct sunlight in ambient temperature between 5˚C and 35˚C

Additional Information▼

How to Use Arky Plaster C to Create Colored Cement Floors in Saudi Arabia

Arky Plaster C is the ideal solution for contractors and engineers in the Kingdom of Saudi Arabia seeking high quality and ease of application. Thanks to its polymer treatment, this mortar provides final surfaces with a homogeneous appearance and strength, eliminating the need for additional plaster layers or complex surface painting.

Basic Application Steps:

Surface Preparation: The cement substrate must be clean, dry, and free of dirt and oil to ensure optimal adhesion.
Mixing: Add 4 liters of clean cold water to each 20 kg bag of Arky Plaster C, then mix until a consistent consistency is achieved.
Application: Use a squeegee or trowel to absorb excess material and ensure even coverage. Clean tools immediately with water before the product dries.
Drying: Allow the surface to cure for 24 hours before walking on it, and avoid direct exposure to strong sunlight during the first few days to ensure uniform hardening.

These colored floors are characterized by high wear resistance, making them ideal for corridors, residential apartments, and commercial offices in hot regions.