🌎 English
🇸🇦 KSA
👨‍🔧 Company
💻 Sign In
🛒 0 0 SAR
🌎 English
🇸🇦 KSA
👨‍🔧 Company
🏢 Supplier Register
☰ All Categories
🧱 Building Material
📦 Precast Concrete
🔧 Plumbing
🏠 Kitchen
🎨 Paints
🌍 International Market
🤝 Our Partners
ℹ️ About Us
📞 Contact Us
📄 Get Quote
Solid Red Brick Al Diyar Code S1N Company Size 112×65×235 mm Weight 3.5 kg

Solid Red Brick Al Diyar Code S1N Company Size 112×65×235 mm Weight 3.5 kg

(8563 Product Views)

Shop Now Solid Red Brick, Al Diyar Factory, size 112×65×235 mm, weight 3.5 kg, It is characterized by strength, rigidity and pressure tolerance, as it is lightweight, environmentally friendly, moisture resistant, and good sound insulation.

in stock
 Call Now

Product description

Solid Red Brick, Al Diyar Factory, It is characterized by strength, rigidity and pressure tolerance, as it is lightweight, environmentally friendly, moisture resistant, and good sound insulation.

  • Length : 235 mm
  • Width : 112 mm
  • Height : 65 mm
  • Weight : 3.5 Kg
  • code : S1N

Related products

Solid Red Brick Al Diyar Company Size 112×65×235...

Solid Red Brick Al Diyar Company Size 112×65×235 mm Weight 3.5 kg
Shop through Youmats, Solid Red Brick, Al Diyar Factory, size 112×65×2...
in stock
📞 Call Now 💬 Chat Now

Solid Red Brick Al Diyar Company Size Width 112×Le...

Solid Red Brick Al Diyar Company Size Width 112×Length 235×Height 65 mm Weight 3.5 kg
Solid Red Brick, Al Diyar Factory, It is characterized by strength, ri...
in stock
📞 Call Now 💬 Chat Now

Solid Red Brick Al Diyar Factory Size 90×47×190 mm...

Solid Red Brick Al Diyar Factory Size 90×47×190 mm Weight 2 kg
Shop Solid Red Brick, Al Diyar Factory, size 90×47×190 mm, weight 2 kg...
in stock
📞 Call Now 💬 Chat Now

Solid Red Brick Al Diyar Company Dimensions 90×90×...

Solid Red Brick Al Diyar Company Dimensions 90×90×90 mm Weight 2.5 kg
Solid Red Brick, Al Diyar Factory, size 90×90×90 mm, weight 2.5 kg, It...
in stock
📞 Call Now 💬 Chat Now

Solid Red Brick Al Diyar Company Size 50×50×200 m...

Solid Red Brick Al Diyar Company Size 50×50×200 mm Code S7 Weight 1 kg
Solid Red Brick, Al Diyar Factory, It is characterized by hardness, st...
in stock
1.13 1.09 SAR
📞 Call Now 💬 Chat Now

Solid Red Brick Al Diyar Factory Size 100×50×200...

Solid Red Brick Al Diyar Factory Size 100×50×200 mm Weight 2 kg Code S5
Solid Red Brick, Al Diyar Factory, size 100×50×200 mm, weight 2 kg, En...
in stock
1.56 1.46 SAR
📞 Call Now 💬 Chat Now

Solid Red Brick Al Diyar Company Dimensions Width...

Solid Red Brick Al Diyar Company Dimensions Width 100×Height 50×Length 200 mm Weight 2 kg Code S5M
Solid Red Brick, Al Diyar Factory, weight 2 kg, Environmentally friend...
in stock
1.74 1.60 SAR
📞 Call Now 💬 Chat Now

Solid Red Brick Al Diyar Factory Size Length 200×W...

Solid Red Brick Al Diyar Factory Size Length 200×Width 100×Height 50 mm Code S5U Weight 2 kg
Solid Red Brick, size 100×50×200 mm, weight 2 kg, Al Diyar Factory, En...
in stock
1.56 1.46 SAR
📞 Call Now 💬 Chat Now

❓ Frequently Asked Questions

Solid red bricks are fully dense and support heavier loads, making them suitable for load-bearing walls and floors. Hollow bricks are lighter, cheaper, and better for partitions or boundary walls. In Riyadh and Jeddah, solid bricks are often preferred where greater strength is required.
A common solid red brick in Saudi Arabia usually weighs between 3.2 and 3.8 kg, depending on size and clay thickness. This weight helps estimate wall load, transport cost, and handling. Always check the exact weight before ordering large quantities.
The most requested size is 235 mm long, 115 mm wide, and 65 mm high. Smaller options are also available. Review the size chart on Youmats before buying, because brick size affects bricks per square meter and total project cost.
Small red bricks can be used for partition walls and finishing, but load-bearing walls need a larger brick with adequate compressive strength. If the brick is solid, sound, and approved, an engineer can confirm whether it meets your project requirements.
The count depends on wall thickness and mortar thickness. For a 65 mm wall, expect about 40 bricks per square meter; for a 115 mm wall, expect about 80. Add 5 to 10 percent for cutting, breakage, and site loss.